Ductos y accesorios de una instalación HVAC

HVAC Equipment · Accessories

The supplies that make the system work better

Insulated copper tubing, condensate pumps and Armaflex insulation: the supplies an installation needs to be done right.

Installation supplies

What goes between the unit and a good installation

Sizes and quantities are defined by the unit, the distance between units and the conditions of the space.

Tubería de cobre para línea de refrigeración

Insulated copper tubing

Insulated copper coils for the refrigerant line between the indoor and outdoor units. The diameter depends on the unit capacity.

Técnico revisando la instalación

Condensate pumps

They remove the water the unit produces when there is not enough slope for gravity drainage. They prevent drips and damp in the space.

Tubería recubierta con aislamiento

Armaflex insulation

Elastomeric covering for the tubing. It prevents condensation along the run and reduces heat loss between units.

Why they matter

The unit does not fail on its own: it fails because of how it was installed

Most failures we inspect in third-party installations do not come from the unit, but from the supplies used to install it.

Correct diameter

Tubing narrower than the unit requires forces the compressor to strain from day one.

No condensation

Uninsulated tubing drips onto the false ceiling and the wall. Armaflex prevents that along the entire run.

Drainage solved

When the drain is not below the unit, the condensate pump is what prevents leaks.

We put together the list of what you need

With three details we can build the full list of supplies for your installation.

STEP 01

Which unit you will install

The unit capacity defines the copper tubing diameter you need.

STEP 02

How far apart they are

The distance between the indoor and outdoor units determines the meters of tubing and insulation.

STEP 03

Where the drain sits

If there is no natural fall towards the drain, we include the condensate pump in the list.

Buying piece by piece is expensive and usually goes wrong

Tubing of the wrong diameter or insulation that does not cover the full run ends up costing more than the initial saving.

We tell you what to order

Tell us the unit and the distance between units, and we will specify sizes and quantities before quoting.

Request your list of installation supplies

Tell us which unit you are installing and at what distance, and we will prepare the quote for tubing, insulation and drainage.

Quote HVAC supplies